Follow

Using Launcher and Configuring Settings

What is Launcher and when would you use it?

Launcher is an Android app that allows you to control what shows up on the home screen when the device boots up or the Home button is pressed. Here are some of its uses.

  • Allows for custom backgrounds, custom app icons, app icon size and text options
  • Custom home screen is comprised of apps and web links
  • Launcher options are controlled from within Moki's web portal
  • Allows access to device settings by use of a password 
  • Needed if you want to lock the tablet down to a small selection of apps

Step 1 - Installing Launcher

Launcher is already in your account so you can include it in your enroll code. Or you can send it to your device from the Devices tab by selecting your device, clicking drop down that says Apps and selecting Launcher.

Screen_Shot_2016-04-14_at_2.52.34_PM.png

Once Launcher is installed on your device it will launch on your screen and show up in your apps menu with this icon,

launcher_app_icon_v2.png

Refresh your browser and reselect your device. You will now see Launcher listed as an enrolled app in the device's Details tab where you can modify the settings.

Screen_Shot_2016-04-13_at_4.39.04_PM.png

Step 2 - Launcher Settings

To start managing settings, click the Manage Settings button and then the Edit Device Settings button. When you have finished editing settings hit the Save button. Launcher settings are composed of sections. The first section is Security, which controls access to the on-device settings menu. The second section is web link settings. The third section is for the home screen pages called Application Pages. The fourth section is for running a screensaver through the device's Daydream functionality. The Application Pages section is where you will do the bulk of your work as it is the place where you upload a custom background image, choose how many pages of apps you'll have, what apps you'll have on what pages and what their icons and app name will be. Here are the settings options and their definitions.

1 - Security

Screen_Shot_2014-10-10_at_4.27.32_PM.png

  • password - Restricts access to the settings which are accessed by pressing and holding on the screen for 5 seconds 
  • Menu Accessible - Turns on or off the ability to get into settings on the device 

2 - Web Page Settings

 Only applicable if you use a Web Link  
  • Home Page URL - If the home button is turned on below then this is the URL that will be loaded when the home button is pushed
  • Home button, refresh button, address bar, back button, forward button - Show or hide these features within the web link browser

3 - White Listed Web Pages

If want to allow any websites that your Web Links have links to you'll need include these in the whitelist.
 

4 - Application Pages

Click Add New to access apps and add a page of apps. There can be multiple pages (windows) of apps. Here is a view of the application page and adding an application
Screen_Shot_2016-04-14_at_9.31.30_AM.png
 

5 - Added Applications

Click the Add New button to add an app or web clip. 
  • Application Name - Selection of apps that are on the device or you can choose Web Link. All apps loaded onto the device will be available.
  • Custom Logo - Upload your own custom logo file for the app, or put in a URL for the image. Yes, this means you can even replace the MokiTouch 2 app with your own logo :) If you don't select an image then the default image for the app will be used. If you select a Web Link then the default image is the Launcher icon
  • Web Link Title - The name that shows up underneath the app or Web Link. Yes, this means you can even replace the words MokiTouch 2 underneath the app :). 
  • URL (for web link) - If you selected the Web Link from the Application Name menu then this is the URL the Web Link will go to when opened. 
There is a numbered order to the apps that can be changed by dragging and dropping them.
 

6 - Screen Saver

For the screensaver to work you must turn Daydream on in settings and set it to run Launcher. You'll also want to check the Daydream options to make sure it will run when charging or docked

Screen_Shot_2014-10-10_at_4.28.05_PM.png

  • Start After - The elapsed time before the screensaver will kick in, this must match your Daydream settings
  • Content (Video or Image URL) - You can upload a file from your computer or just use a URL that goes directly to where the video is hosted. NOTE: Your screensaver must be a web standard file format including any of the following: .mp4, .webm, .png, .jpg, or .gif.

Step 3 - Setting the Device to Boot into Launcher

When you hit the home button on the device you'll get the option to use the native Android app as the home screen or use Launcher as the home screen. Choose Launcher and Always when you are ready to roll. This will cause the device to boot into Launcher when the device powers on.

Screenshot_2014-10-30-13-07-52.png
 

Step 4 - Save your settings for later use

After you have your device set the way you want, follow these steps to save these settings to apply to other devices in the future.

  1. With your device still selected, click the Manage Settings button then click the drop down that says Apply Saved Settings
  2. Select Manage Settings Templates

    Screen_Shot_2016-04-19_at_1.16.59_PM.png
  3.  
  4. Click the Create New Template button

    Screen_Shot_2016-04-19_at_1.16.15_PM.png
  5.  
  6. Give the template a name and hit Save

    Screen_Shot_2016-04-19_at_1.15.39_PM.png
  7.  
  8. The new template will show up in your Apply Saved Settings drop down

    Screen_Shot_2016-04-19_at_1.12.36_PM.png

Step 5 - Save your settings for later use

After you have your device set the way you want, follow these steps to save these settings to apply to other devices in the future.

  1. With your device still selected, click the Manage Settings button then click the drop down that says Apply Saved Settings
  2. Select Manage Settings Templates

    Screen_Shot_2016-04-19_at_1.16.59_PM.png
  3.  
  4. Click the Create New Template button

    Screen_Shot_2016-04-19_at_1.16.15_PM.png
  5.  
  6. Give the template a name and hit Save

    Screen_Shot_2016-04-19_at_1.15.39_PM.png
  7.  
  8. The new template will show up in your Apply Saved Settings drop down for you to apply to your other devices

    Screen_Shot_2016-04-19_at_1.12.36_PM.png

Step 6 - Apply your Saved Settings to the rest of your devices

You can apply one device at at time by selecting the device in the Devices tab, clicking Manage Settings and selecting the Saved Template. Or, you can apply them to the entire fleet at one time from the Device Groups tab. Refer to our articles on each of these topics. 

Apply an App's Saved Settings from the Device's Tab

Using Device Groups to Apply an App's Saved Settings

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.